Woods LU126 & LU132

LU Series loader mounts utilize the structural integrity inherent in 45 to 90 horsepower tractors and feature a center-point attachment—reducing obstructions and providing a much cleaner, more integrated look. A wrenchless, 2-pin mid-attach mount design allows for quick attaching and detaching of the loader boom from the tractor. Simply set the bucket on the ground, roll to release pressure on attachment pins, and set loader stand. Pull the attachment pins by hand, detach hydraulics, then drive out.

Commercial grade bucket – increases bucket efficiency with round-back bucket design, engineered to allow easy and even material flow, into and out of bucket. Optional bolt-on cutting edge available.

Mid-attaching loader boom – provides less obstruction along the side and front of tractor, reducing tire interference for greater turning flexibility and shorter turn radius.

4-bar bucket linkage – allows for 35-degree bucket roll-back angle to carry full loads without loss, and a 50-degree bucket dump angle to ensure complete emptying.

High performance, multi-function loader control valve – creates faster regenerative valve action. While bucket returns from dump position to loading position, oil flow from lift cylinders directs to bucket cylinders, leveling the bucket.

Model
LU126
LU132
Tested hydraulic PSI
2,750 psi
2,750 psi
Lift capacity at bucket pin
3,000 lbs
3,500 lbs
Breakout at bucket pin
4,650 lbs
5,000 lbs
Lift capacity at 31.5” ahead of bucket pins
1,970 lbs
2,400 lbs
Breakout at 31.5” ahead of bucket pins
3,250 lbs
3,800 lbs
Maximum lift height
126"
132"
Clearance under bucket
101"
108"
Reach at maximum height
29"
31"
Bucket roll back angle
35°
35°
Bucket dump angle
50°
50°
Maximum digging depth
5"
5"
Lift cylinder diameter
2.48"
2.76"
Bucket cylinder diameter
2.76"
2.76"
Recommended tractor horsepower
45-90
45-90
Bucket widths
72", 84"
72", 84"
Bucket rated capacity c.c. ft. (72" / 84")
17.1 / 20.0
17.1 / 20.0
Pivot pins diameter
1.25"
1.25"