SPECIFICATIONS*

Gearbox — 150 HP, 540 or 1,000 RPM, Base Mounted, 1:1.47 Ratio
Malleable housing; forged alloy steel; carburized and hardened gears and shafts; 20 splined 1 3/4”input shaft, 2 1/8” output shaft; tapered bearings; lifetime lubricated.

Slip Clutch
Heavy duty spring-type adjustment with four friction discs.

Shielded PTO — Category 4
Made from finest quality propeller shaft materials and needle bearing universal joints.

Blades
1/2” material, alloy spring steel, airlift design, free swinging for long life and clean cutting. Swings back when encountering obstructions, mounted on shoulder bolts.

Tail Wheel
For 3-point hitch: Extra heavy duty, tapered bearings, 4” by 8” laminated puncture-proof tire.
For pull type: Extra heavy duty, tapered bearings, two 6” by 9” laminated puncture-proof tire.

Cutting Height — 2” to 13”

Turner Special Deck — 3/16” Material
Heavy duty, one-piece electric welded frame, rolled I-Beam sides, mechanical tubing structurals.

Rolled I-Beam Sides — 1/4” Material
Shaped to form sides of cutter

Chain Guards Front and Rear

Heavy Duty Category One or Two Hitch

Weight:
Model 7210 — 1130 Ib.
Model 6010 — 860 Ib.

*These specifications are standard; however, any State Department of Transportation Specifications that may differ from standard Bush-Whacker Specifications will take precedence and be implemented into production.

SPECIFICATIONS*

Gearbox — 150 HP, 540 or 1,000 RPM, Base Mounted, 1:1.47 Ratio
Malleable housing; forged alloy steel; carburized and hardened gears and shafts; 20 splined 1 3/4”input shaft, 2 1/8” output shaft; tapered bearings; lifetime lubricated.

Slip Clutch
Heavy-duty spring-type adjustment with four friction discs.

Shielded PTO — Category 4
Made from finest quality propeller shaft materials and needle bearing universal joints.

Blades
1/2” material, alloy spring steel, airlift design, free swinging for long life and clean cutting. Swings back when encountering obstructions, mounted on shoulder bolts.

Tail Wheel —
For 3 point hitch: Extra heavy-duty, tapered bearings, 4” by 8” laminated puncture-proof tire.
For pull type: Extra heavy-duty, tapered bearings, two 6” by 9” laminated puncture-proof tires.

Cutting Height — 2” to 13”

Turner Special Deck — 3/16” Material
Heavy-duty, one-piece electric welded frame, rolled I-Beam sides, mechanical tubing structurals.

Rolled I-Beam Sides — 1/4” Material
Shaped to form sides of cutter

Chain Guards Front and Rear

Heavy Duty Category One or Two Hitch

Weight — 1380 Ib.

*These specifications are standard; however, any State Department of Transportation Specifications that may differ from standard Bush-Whacker Specifications will take precedence and be implemented into production.

SPECIFICATIONS*

Gearbox — 540 RPM
110 HP main or transfer box, 100 HP outboard boxes with 2 1/8” output shaft, malleable housing, forged alloy steel, carburized and hardened gears and shafts, tapered and ball bearings.

Slip Clutch
Heavy-duty spring type adjustment with two friction discs on main shaft, outboard protection by means of shock absorbing rubber disc connected with splined spiders which form a coupler.

Cutting Width
104” total cut, 57” cutting swathe to right of tractor centerline and 47” to left of tractor centerline.

Shielded PTO and Outboard Shafts — Category 4
Made from finest quality propeller shaft material and needle bearing universal joints.

Blades
1/2” material, alloy spring steel, airlift design, free-swinging for clean cutting, mounted on shoulder bolts.

Two Tail Wheels
For 3 point hitch: Extra heavy-duty, tapered bearings, 4” by 8” laminated puncture-proof tire.
For pull type: Extra heavy-duty, tapered bearings, 6” by 9” laminated puncture-proof tire.

Cutting Height — 2” to 13”

Turner Special Deck — 3/16” Material
Heavy-duty one-piece electric welded frame, rolled I-Beam sides, heavy angle iron and mechanical tubing structurals.

Rolled I-Beam Sides — 1/4” Material

Chain Guards Front and Rear

Heavy-Duty Category One or Two Hitch

Weight — 1,590 lb.

*These specifications are standard; however, any State Department of Transportation specifications that may differ from standard Bush-Whacker Specifications will take precedence and be implemented into production.

SPECIFICATIONS*

Gearboxes — 540 RPM or 1,000 RPM
250 HP main or transfer box with 1 3/4” 20 splined input and output shafts. 150 HP outboard boxes with 1 3/4” 20 splined input shaft and 2 1/8” output shaft. All gearboxes have forged alloy steel malleable housings, carburized and hardened gears and shafts, tapered and ball bearings.

Drive Shafts
Shielded PTO’s made from the finest quality propeller shaft material and needle bearing universal joints. Category 4 main input and side drives. Category 4 jack shaft for pull model. Category 4 80-degree constant velocity main driveshaft optional for pull model.

Slip Clutch
Heavy-duty clutch with spring type adjustment and four friction disks on main shaft, outboard protection by means of shock absorbing rubber elements connected to splined yokes to form a coupler.

Blades
1/2” x 4” material, alloy spring steel, airlift design, free swinging when encountering obstructions, 6 inch overlap for better cutting. Blade tip speed 15,800 fpm.

Wheels
Two solid rubber (notat) tires standard. Independent shock absorbing system for all wheel axles. Optional: aircraft tires or implement tires, dual axle arms (4 tires total).

Turner Special Deck — 3/16” Material
Heavy-duty, one-piece electric welded frame, 1/4” rolled I-beam sides, heavy mechanical tubing structurals.

Hydraulic Adjustments
Hydraulic cylinder controls cutting and traveling height adjustments for pull and semi mount models (optional for lift model).

Chain Guards Front and Rear

Dimensions
Cutting width: 121 inches. Cutting height: adjustable from 1 1/2” to 15”. Axles adjustable from 24” centers to 40” centers for row crops. Overall width: 131 inches. Overall length 125 inches. Transportation width: 131 inches. Cutting height for aircraft and implement tires: 1 1/2” to 17”.

Weight
Lift model: 3,040 lb. Pull model: 3,025 lb. Semi mount model: 2,610 lb.

Other Standard Features Include:
Replaceable skid shoes. For pull model: heavy duty tongue assembly with dual leveling rods, hydraulic hose holder, jack for easy hookup and unhooking from tractor.

*These specifications are standard; however, any State Department of Transportation Specifications that may differ from standard Bush-Whacker Specifications will take precedence and be implemented into production.